Product features of electric Screw press

Features of electric Screw press:

1. Accurate energy control and fast response speed

The pressurization energy is simple and accurately pre-set, and each stroke can be repeatedly subjected to accurate and precise pressurization without any discrepancies, ensuring the uniformity of the product. Switched reluctance motor drive with fast response speed.

2. Reasonable structure and more uniform products

Due to the absence of a structural bottom dead center, there is no need to worry about excessive load and sliding jamming caused by excessive material size or uneven heating temperature. Moreover, the same material can be repeatedly pressurized with different strengths to gradually deform and undergo progressive forging.

3. Rapid prototyping, prolonging mold life

When the electric Screw press is close to the bottom dead center, the slider speed is very fast, the time for the die to extrude the material is very short, and the processing can be completed immediately before the hot material cools down. The contact time with the mold is short, and the temperature change of the mold is small, thus greatly extending the service life of the mold.

4. Simple structure and low maintenance cost

Switched reluctance motor directly drives the screw to rotate forward and backward through belt or gear transmission, with a simple structure, fewer parts, and low maintenance cost.

5. Energy technology is freely controllable and has a wide range of applications

The electric Screw press can set the pressure energy so that the slider will first accelerate and then decelerate to pressurize the material with the set energy. Large tonnage presses can also forge smaller parts, and the processing time per unit of stroke remains basically unchanged. Use both large and small, achieving twice the result with half the effort.

6. Efficient, energy-saving, and reducing production costs

The switched reluctance motor only rotates when the machine is started, and the friction method is for the motor to continuously run. Compared with previous friction presses, the comprehensive energy-saving effect is about 55%.

7. Stamping forming with high compression energy

The pressurization method of electric Screw press is the same as that of traditional friction press. The flywheel energy is completely consumed and pressurized, which is an instantaneous stamping and pressurization method, resulting in a very high amount of pressurization energy.

8. Low noise and vibration

The electric Screw press generates pressure in the frame. Compared with a stamping hammer, it does not generate excessive ground vibration and can implement foundation engineering at a lower cost.

The manufacturer of electric numerical control Screw press interprets the working principle of electric Screw press

Precautions for maintenance of electric Screw press

The manufacturer of electric numerical control Screw press interprets the working principle of electric Screw press

Precautions for maintenance of electric Screw press

In July 2019, Minghui Company signed contracts with Korean clients for J58A-4000T and J58A-630T

2020-12-04

Successful installation and commissioning of J58A-4000T electric Screw press exported to South Korea

2020-12-04

Qingdao Minghui Metal Forming Machinery Co.,Ltd specializes in the production of J58A series electric CNC Screw press and FP/MP series hot die forging presses. The company has a strong technical force. Since its inception, the company has been adhering to the business philosophy of "responsibility, integrity and pragmatism", and has been forging ahead in business activities.

Qingdao Minghui Metal Forming Machinery Co.,Ltd

Address: Taiwan Industrial Park, Jiaozhou City, Qingdao, Shandong
E-mail: sales@qdmhjx.com

Contacts: Mr Wang
Phone: +86 18663977787

Fax: 86-0532-83281398

Address: Taiwan Industrial Park, Jiaozhou City, Qingdao, Shandong
E-mail: sales@qdmhjx.com

Contacts: Mr Wang
Phone: +86 18663977787

Fax: 86-0532-83281398