The manufacturer of electric numerical control Screw press interprets the working principle of electric Screw press

The electric Screw press is an energy-saving precision die forging equipment EPC series, which belongs to the motor mechanical transmission electric Screw press. The machine adopts servo switched reluctance speed regulating motor, which has the characteristics of large starting torque and good speed regulating performance.

The electrical control system adopts a programmable logic controller (PLC) as the main control device, improving the reliability of the entire machine operation. It uses a human-machine interface (HM) to achieve information exchange between operators and the machine, making it convenient for users to set parameters such as strike energy and display machine faults. The machine has the characteristics of strong anti eccentric load capacity, small die stress, long service life, high forging forming accuracy, and is superior to the traditional Screw press in terms of energy saving, accurate control of striking force, etc. Suitable for processes such as die forging, precision pressing, correction, bending, stamping, etc. It is an ideal precision forging equipment for industries such as trains, cars, tractors, ships, aviation, hardware tools, medical equipment, tableware, etc.

Interpretation of electric numerical control Screw press manufacturers electric Screw press

The electric Screw press not only has few parts, short transmission chain, simple structure, convenient operation and maintenance, stable operation, low noise and other characteristics, but also has advantages that other similar products cannot match:

O Stronger ability to resist eccentric loads, with more advantages in multi mold forging ability;

Accurate energy control and good product forming consistency;

The slider has no bottom dead center and does not get stuck;

Adopting a unique screw and flywheel connection structure;

The equipment has high energy and a wider working range;

Adopting advanced lubrication technology, greatly extending the service life of the screw pair;

Energy saving and environmental protection. After inspection by the National Quality Supervision and Inspection Center for Foundry and Forging Machinery, compared with the same specification double disc friction press, the energy saving can reach over 48.5%.

Electric Screw press is an energy-saving precision forging equipment. CTZ series is a direct motor driven electric Screw press; The direct transmission form where the motor rotor is connected to the screw shaft as a whole.

Features: No mechanical transmission, direct motor drive, high transmission efficiency, low failure rate, low motor speed, high torque, able to meet various process requirements for forging strike. The electrical control system uses programmable logic controllers (PLCs) as the main control device to improve the reliability of the entire machine operation. The human-machine interface (HMI) is used to exchange information between operators and the machine, making it convenient for users to set parameters such as strike energy and display machine faults. The machine has the characteristics of strong anti eccentric load capacity, small die stress, long service life, high forging forming accuracy, and is superior to the traditional Screw press in terms of energy saving, accurate control of striking force, etc. Suitable for processes such as die forging, precision pressing, correction, bending, stamping, etc. It is an ideal precision forging equipment for industries such as trains, cars, tractors, ships, aviation, hardware tools, medical equipment, tableware, etc.

The manufacturer of electric numerical control Screw press interprets the nuts of electric numerical control Screw press

Product features of electric Screw press

The manufacturer of electric numerical control Screw press interprets the nuts of electric numerical control Screw press

Product features of electric Screw press

In July 2019, Minghui Company signed contracts with Korean clients for J58A-4000T and J58A-630T

2020-12-04

Successful installation and commissioning of J58A-4000T electric Screw press exported to South Korea

2020-12-04

Qingdao Minghui Metal Forming Machinery Co.,Ltd specializes in the production of J58A series electric CNC Screw press and FP/MP series hot die forging presses. The company has a strong technical force. Since its inception, the company has been adhering to the business philosophy of "responsibility, integrity and pragmatism", and has been forging ahead in business activities.

Qingdao Minghui Metal Forming Machinery Co.,Ltd

Address: Taiwan Industrial Park, Jiaozhou City, Qingdao, Shandong
E-mail: sales@qdmhjx.com

Contacts: Mr Wang
Phone: +86 18663977787

Fax: 86-0532-83281398

Address: Taiwan Industrial Park, Jiaozhou City, Qingdao, Shandong
E-mail: sales@qdmhjx.com

Contacts: Mr Wang
Phone: +86 18663977787

Fax: 86-0532-83281398